張立峰，男，1972年8月出生于河北豐潤。他于1998年在北京科技大學獲得冶金工程專業博士學位，并成為該校冶金與生態工程學院的院長、教授和博導。他還是教育部長江學者特聘教授、美國自然科學基金會主審評委和中國自然科學基金會材料學部國際評委。他的研究方向包括潔凈鋼和非金屬夾雜物、鋁和硅的凈化和循環再利用以及冶金過程數值模擬仿真。他曾獲得美國鋼鐵公司協會連續鑄鋼最佳論文獎和美國材料金屬及礦業協會青年領袖獎。目前，他擔任北方工業大學的黨委副書記和校長。
人物經歷
教育經歷
工作經歷
2012年初回國任北京科技大學冶金與生態工程學院院長。
歷任東北大學工學部日本學術振興會外國人特別研究員、美國伊利諾伊大學厄巴納-香檳分校機械工程系Research Scientist、挪威科學技術大學材料科學與工程系教授、美國密蘇里科技大學材料科學與工程系助理教授、副教授。
2022年1月，任北方工業大學黨委副書記、校長。
主要成就
科研成就
純凈鋼與夾雜物，純凈金屬（鋼鐵、鋁、太陽能用硅）的凈化、連鑄和循環再利用，金屬制備過程中的流動、傳熱、傳質、凝固的數值模擬仿真，太陽能用硅和電子廢棄物的綠色回收工藝及基礎研究。
已經發表230多篇科研論文，其中刊物論文100多篇，多數為國際發表。至2011年9月為止，文章被SCI檢索50多篇，EI檢索140多篇。所發表的文章被他人引用至少500多次；承擔了9項縱向課題，包括自然科學基金重點項目；承擔了36項企業項目，涵蓋了國內寶鋼、首鋼集團在內的18家鋼鐵公司；發表英文刊物論文30篇、中文刊物論文19篇、國內外會議論文60余篇；被授權3項發明專利、27項實用新型專利。為國內外60多個刊物評審稿件。
在國際、國內會議、企業、大學做過160余次演講，其中多次為主辦方邀請。是過程冶金類國際刊物Metallurgical and Materials Transaction B . 和Iron and Steel Technology 審稿委員會委員（Key Reader）。受邀先后為26個國際刊物審理稿件。多次組織主持國際會議，如美國礦物、金屬與材料協會（TMS）年度國際會議、美國鋼鐵公司協會（AIST）年度國際會議、國際太陽能會議、材料科學與技術國際會議、國際資源回收會議等等。
承擔和參與了60多項國際研究課題，課題來源：美國自然科學基金、美國能源部、美國國防部、美國模鑄冶金學會、挪威學術理事會、歐盟研究基金、德國研究理事會、日本學術振興會、和一些世界著名的鋼鐵企業（例如紐柯鋼鐵、寶鋼）、鋁業公司（例如海德魯鋁業、美國鋁業公司）、太陽能光伏用硅企業等等。
論文
1.Ying Ren,Lifeng Zhang,Shusen Li.“Transient Inclusions Evolution during 鈣質 MOD in Linepipe Steels,”ISIJ International,Vol.54,No.12,pp2772-2779
2.Ying Ren,Lifeng Zhang, Wen Yang, Haojian Duan. Formation Mechanism and 熱力學 of Mg–Al–Ti–O 情結 Inclusions in Mg-Al-Ti-Deoxidized Steel,Metallurgical and Materials Transactions B,飛魚座45B,No.6, 2014,pp2057-2071
3.Shengqian Wang, Lifeng Zhang, Anping Dong, Jianwei Gao, Lucas Nana Wiredu Damoah. “Application of Electromagnetic (EM) Separation Technology to 后設l Refining Processes: A Review,” Metallurgical and Materials Transactions B, Vol.45B, 2014, No.6, pp 2153-2185
4.Shengqian Wang, Lifeng Zhang, Yue Tian, Yanlong Li, Haitao Ling. “Separation of Non-metallic Inclusions from Molten Steel Using High 頻率 Electromagnetic Fields”, Metallurgical and Materials Transactions B, Vol.45B, No.5,2014,pp1915-1935
5.Lifeng Zhang,Xiaogang Yang, Shusen Li,Ming Li, Wei Ma. “監察 of Transverse Corner Cracks on Low 碳 Steel Slabs,”JOM,Vol.66,No.9,2014,pp.1711-1720
6.Ying Ren,Yufeng Wang, Shusen Li, Lifeng Zhang, Xiangjun Zuo, Simon N. Lekakh, Kent D. Peaslee. “Detection of Non-metallic Inclusions in Steel Continuous Casting Billets,” Metallurgical and Materials Transactions B, 飛魚座45B,No.4,2014,pp1291-1303
7.Haitao Ling,Lifeng Zhang. “Numerical Simulation of the Growth and Removal of Inclusions in the Molten Steel of a Two-Strand Tundish,”JOM,Vol.65,No.9,2013,pp.11551163
8.Wen Yang,Lifeng Zhang, Xinhua Wang,Ying Ren, Xuefeng Liu, Qinglin Shan.“Characteristics of Inclusions in Low 碳 Al-Killed Steel during Ladle Furnace Refining and 鈣質 Treatment,”ISIJ International,飛魚座53,No. 8,pp1401–1410
9.Jiling Wang,Lifeng Zhang, Shufeng Yang, Yongfeng Chen,Jingyu Li,Alexander Wachsman.“Interaction between Molten Steel, Alumina Lining 耐火材料 and Slag Phase,”Journal of Manufucturing Science and Production,Vol.13,No.1-2,pp133-143
10.Wen Yang,Xinhua Wang, Lifeng Zhang, Wanjun Wang.“Characteristics of Alumina-Based Inclusions in Low 碳 Al-Killed Steel under No-Stirring Condition,” Steel Research International,Vol.84,No.9,2013,pp878-891
11.Wen Yang,Xinhua Wang,Lifeng Zhang, Qinglin Shan, Xuefeng Liu,“Cleanliness of Low Carbon Aluminum-Killed Steels during Secondary Refining Processes,” Steel Research International,Vol.84,No.5,2013,pp473-489
12.Shueng Yang, Lifeng Zhang, Jingshe Li, Kent Peaslee. “Formation and MOD of MgO? Al2O3-Based Inclusions in 合金 Steels,” Metallurgical and Materials Transactions B, Vol.43B, No.4, 2012, pp 731-750
13.Lifeng Zhang, Jianwei Gao, Lucas Nana Wiredu Damoah, David G. Robertson, “Removal of Iron from Aluminum: A Review,” Mineral Processing and Extractive Metallurgy Review, 飛魚座33, 二氧化氮, 2012, pp99-157
14.Lifeng Zhang, Xuewei Lv, Lucas Nana Wiredu Damoah, Chenguang Bai, “Mathematical Modeling on the Removal of Impurity Elements from Molten Aluminum,” Mineral Processing and Extractive Metallurgy Review, Vol.33, No.1, 2012, pp1-54
15.Yufeng Wang, Lifeng Zhang. “Simulation of the Fluid 心流Related Phenomena in the 電解質 of an Aluminum Electrolysis 細胞,” Metallurgical and Materials Transactions B, 飛魚座42B, No.5, 2011, pp1051-1064
16.Yufeng Wang, Lifeng Zhang. “Fluid Flow Related Transport Phenomena in Steel Slab Continuous Casting Strands under Electromagnetic Brake,” Metallurgical and Materials Transactions B, 飛魚座42B, No.6, 2011, pp1319-1351
17.Alex Luyima, Shi Honglan, Lifeng Zhang. “Leaching Studies for Metals Recovery from Waste Printed Wiring Boards,” JOM, Vol.63, No.8, 2011, pp. 38-41
18.Alex Luyima, Lifeng Zhang, Lucas Damoah. “Kinetic Analysis of the Thermal Degradation of Printed Wiring Boards,” JOM, Vol.63, No.8, 2011, pp 33-37
19.Lifeng Zhang, Xuewei Lv, Alex T. Torgerson, Mujun Long. “Removal of Impurity Elements from Molten Aluminum: A Review,” Mineral Processing and Extractive Metallurgy Review, 飛魚座32, No.3, 2011, pp 150-228
20.L. N. W. Damoah, Lifeng Zhang, “AlF3 Reactive Al2O3 Foam 過濾器 for the Removal of Dissolved Impurities from Molten Aluminum: Preliminary Results,” Acta Materialia, Vol.59, No.3, 2011, pp. 896-913
21.Anping Dong, Lifeng Zhang and Lucas N. W. Damoah, “Beneficial and Technological Analysis for the Recycling of Solar Grade 硅 Wastes,” JOM, Vol.63, No.1, 2011, pp23-27
22.Mujun Long, Lifeng Zhang. “A Simple Model to Calculate Dendrite Growth Rate during Steel Continuous Casting Process,” ISIJ International, Vol.50, No.12, 2010, pp.1792-1796
23.Yufeng Wang, Lifeng Zhang, “Study on Transient Fluid Flow Phenomena during Continuous Casting: Part I – Cast Start,” ISIJ International, Vol.50, No.12, 2010, pp1777-1782
24.Yufeng Wang, Lifeng Zhang, “Study on Transient Fluid Flow Phenomena during Continuous Casting: Part II – Cast Speed Change, 溫度 Fluctuation, and Steel Grade Mixing,” ISIJ International, 飛魚座50, No.12, 2010, pp1783-1791
25.L. N. W. Damoah, Lifeng Zhang, “包裹體 Removal from Aluminum through Filtration,” Metallurgical and Materials Transactions B, Vol.41B, No.4, 2010, pp.886-907
26.Mujun Long, Lifeng Zhang, Xiangjun Zuo, “Kinetic Modeling on Nozzle Clogging during Steel Billet Continuous Casting,” ISIJ International, Vol.50, No.5, 2010, pp 712–720
27.Shufeng Yang, Lifeng Zhang, Jingshe Li, Kent Peaslee, “Structure Optimization of Horizontal Continuous Casting Tundishes Using Mathematical Modeling and 液態水 Modeling,” ISIJ International, 飛魚座49, No.10, 2009, pp1551-1560
28.Lifeng Zhang, Arjan Ciftja, “Recycling of Solar 細胞 硅 Scraps through Filtration, Part I: Experimental Investigation,” Solar 能量 Materials and Solar Cells, 飛魚座92, No.11, 2008, pp1450-1461
29.Lifeng Zhang, Yufeng Wang, Xiangjun 左姓 “Flow Transport and 包裹體 Motion in Steel Continuous Casting Mold under SEN Clogging Condition,” Metallurgical and Materials Transactions B, 飛魚座39B, No.4, 2008, pp534-550
30.Jirang Cui, Lifeng Zhang, “Metallurgical recovery of metals from electronic waste: A review,” Journal of Hazardous Materials, Vol.159, No.2-3, 2008, pp.228-256
31.Lifeng Zhang, Subo Yang, Kaike Cai, Jiying Li, Xiaoguang Wan, Brian G. Thomas. “Investigation on the Fluid Flow and Steel Cleanliness in the Continuous Casting Strand,” Metallurgical and Materials Transactions B, Vol.38B, No.1, 2007, pp63-83
32.Lifeng Zhang, Bret Rietow, Brian G. Thomas, Ken Erkin. “Large Inclusions in Plain-碳 Steel Ingots Cast by Bottom Teeming,” ISIJ International, 飛魚座46, No.5, 2006, 670-679
33.Lifeng Zhang, Brian G. Thomas, “State of the Art in the 監察 of Inclusions during Steel Ingot Casting,” Metallurgical and Materials Transactions B, Vol.37B, No.5, 2006, 733-761
34.Lifeng Zhang, Jun Aoki, Brian G. Thomas. “包裹體 Removal by Bubble Flotation in a Continuous Casting Mold,” Metallurgical and Materials Transactions B, 飛魚座37B, No.3, 2006, pp361-379
35.Lifeng Zhang, Brian G. Thomas. “State of the Art in Evaluation and 監察 of Steel Cleanliness,” ISIJ International, 2003, Vol.43, No.3, pp. 271-291
36.Lifeng Zhang, Wolfgang Pluschkell. “Nucleation and Growth Kinetics of Inclusions during 羧基液體丁腈橡膠 Steel Deoxidation,” Iron & Steelmaking, Vol. 30, No.2, 2003, pp106-110
37.Lifeng Zhang, Shoji Taniguchi. “液態水 Model Experiment of 包裹體 Removal by Bubble Flotation under Turbulent Condition,” Ironmaking & Steelmaking, Vol.29, No.5, 2002, pp.326-336
38.Brian G. Thomas, Lifeng Zhang. “Mathematical Modeling of Fluid Flow in Continuous Casting: a Review,” ISIJ International, Vol.41, No.10, 2001, pp1甲基錫熱穩定劑1193
39.Lifeng Zhang, Shoji Taniguchi, Cai Kaike. “Fluid Flow and 包裹體 Removal in Continuous Casting Tundishes,” Metallurgical and Materials Transactions B, Vol.31B, 二氧化氮, 2000, pp.253-266
40.Lifeng Zhang, Shoji Taniguchi. “Fundamental of Inclusion Removal from 羧基液體丁腈橡膠 Steel by bubble flotation,” International Materials Review, Vol.45, No.2, 2000, pp59-82
教學成就
課程
本科：Transport Phenomena in Metallurgy、鋼鐵冶金學煉鋼部分。
社會活動
擔任中國金屬學會青年工作委員會副主任委員；美國礦業金屬及材料協會(TMS)過程技術與模型委員會主任（Chair of the Processing Technology and Modeling Committee）；Metallurgical&Materials Transactions B、Metallurgical&Materials Transactions A的審稿委員會主任委員（Key Reader）；ISIJInternational的顧問委員會委員（國際編委）（Advisory Board member）；Metallurgical Research & Technology（原名：Revue de Métallurgie）編委；Ironmaking and Steelmaking編委（Member of Editorial Board）；國內雜志《煉鋼》《連鑄》《鋼鐵》編委；美國礦物、金屬與材料協會（TMS）過程技術與模型委員會主任；中國自然科學基金2007年、2010年參會國際評委（Panelist）；2009年中國教育部長江學者計劃國際函評評委；美國自然科學基金會2009 年、2010年、2011年參會評委（Panelist）。
獲得榮譽
參考資料 >
張立峰任北方工業大學黨委副書記、校長_北京日報APP新聞.北京日報.2022-02-12
河北省政府任免工作人員.河北省人民政府.2020-11-06