沙建軍，大連理工大學航空航天學院，教授，博士生導師。研究方向?yàn)橹饕芯亢娇蘸教祛I(lǐng)域和先進能源領域應用的高性能結構和功能材料復合材料。研究?jī)?nèi)容包括對先進復合材料的物理性能、力學性能、結構優化和設計以及制備工藝，采用實驗研究和數值模擬研究相結合對材料進行多尺度分析與表征。
人物經歷
1.1994年7月-1997年7月：寧夏大學物理與電子信息工程系，助教。
2. 1997年7月-2000年7月：中國原子能科學研究院，工學碩士。
3. 2000年7月-2003年9月：中國原子能科學研究院，工學博士。
4. 2000年-2002年10月：寧夏大學物理與電子信息工程學院，講師。
5. 2002年10月-2005年9月：京都大學，能源學博士，日本文部科學省省國費獎學金。
6. 2002-2005 期間兩次兼任研究助手：（1）2002年12月-2003年3月：日本京都大學先進能源與理工學研究所，兼任研究助手，由日本文部省COE（Center Of Excellence）資助.（2）2004年6月-2005年3月：日本京都大學先進能源與理工學研究所，兼任研究助手，由日本文部省COE（Center Of Excellence）資助。
7. 2005年10月-2007年11月：受日本學術振興會資助(JSPS: Japan Society for thePromotion of Science)，作為日本學術振興會特別研究員在京都大學國際創新中心(International Innovation Center)從事合作研究。
8. 2007年11月-2009年5月：西南交通大學教授。
9. 2008年4月-2009年5月：洪堡學者，受德國洪堡基金會(Alexander von Humboldt Foundation)資助在德國巴伐利亞州拜羅伊特大學從事合作研究。
10. 目前：大連理工大學教授。
教育科研
主要論文
近五年主要論文清單：
1. 約翰·約翰遜 Sha, T. Hinoki, A. Kohyama, Microstructure evolution and high-溫度 mechanical properties of Hi-NicalonTM Type S fiber annealed and crept under various oxygen partial pressures, Materials Characterization, 2009, 60:796-802.
2. J. J. Sha, S. Ochiai, S. Iwamoto, K. Morishita, H. Okuda, Y. Waku, N. Nakagawa and A. Mitani, T. Ishikawa, “Residual strain in YAG phase of directionally solidified eutectic Al2O3/YAG ceramic composite by X-ray diffraction and finite element analysis”, Collected in the Proceedings of the 16th International Conference on Composite Materials (ICCM-16), 2007, Kyoto, Japan.
3. J. J. Sha, S. Ochiai, H. Okuda, S. Iwamoto, Y. Waku, N. Nakagawa and A. Mitani “Residual stresses in directionally solidified eutectic Al2O3/YAG ceramic composite by X-ray diffraction”, Journal of the European Ceramic Society, 2008, 28 (12): 2319-2324.
4. 約翰·約翰遜 Sha, T. Hinoki, A. Kohyama, Thermal and mechanical stabilities of Hi-Nicalon fiber under annealing and creep in various oxygen partial pressures, Corrosion Science, 2008, 50(11): 3132-3138.
5. S. Ochiai, S. Ikeda, S. Iwamoto, J. J. Sha, H. Okuda, Y. Waku, N. Nakagawa, A. Mitani, M. Sato and T. Ishikawa, Residual Stresses in YAG of Melt Growth Al2O3/YAG Eutectic Composite Estimated by Indentation Fracture Test and Finite Element Analysis, Journal of the European Ceramic Society, 2008, 28 (12): 2309-2317.
6. J. J. Sha, T. Hinoki, and A. Kohyama, “Microstructural characterization and fracture properties of SiC-based fibers annealed at elevated temperatures”, Journal of Materials Science, 42, 2007, pp: 5046-5056.
7. S. Ochiai, Y. Sakai, K. Kuhara, S. Iwamoto, 約翰·約翰遜 Sha, “Analytical modeling of stress-strain behavior at 1873 K of alumina/YAG composite compressed parallel and perpendicular to the solidification direction,” Composite Science and Technology, 67 (2007): pp 270-277.
8. J. J. SHA, T. Hinoki, and A. Kohyama, “Tensile properties and microstructure characterization of Hi-NicalonTM SiC fibers under loading,” International Journal of Fracture, Vol. 142 (2006): pp 1-8.
9. J. J. Sha, J. S. Park, T. Hinoki, and A. Kohyama, “Microstructural characterization and Fracture properties of advanced SiC fibers under loading,” Materials Science and Engineering: A, (2007), 456: pp 72-77.
10. J. J. Sha, J. S. Park, T. Hinoki, and A. Kohyama, “Strength and fracture properties of advanced SiC-based fibers”, Mechanics of Composite Materials, Vol. 42, No. 6, (2006):pp 527-534.
11. J. J. Sha, J. S. Park, T. Hinoki, and A. Kohyama, “Bend stress relaxation of advanced SiC-based fibers and its prediction to tensile creep” Mechanics of Materials, Vol. 39 (2), (2007): pp 175-182.
12. J. J. Sha, J. S. Park, T. Hinoki, and A. Kohyama, “Heat treatment effect on creep behavior of polycrystalline 碳化硅based fibers,” Materials Characterization, Vol. 57 (1), (2006): pp 6-11.
13. J. J. Sha, J.S. Park, T. Hinoki, A. Kohyama, “Hot corrosion, Oxidation and their effects on tensile strength of SiC fiber in alkaline melts,” Materials transaction, JIM, 46 (5) (2005) 1032-35.
14. J. J. Sha, J.S. Park, T. Hinoki, A. Kohyama, J. Yu, “Tensile properties and creep behavior of SiC-based fibers under various oxygen partial pressures,” Materials Science forum, Vols. 475-479 (2005):pp 1333-1336.
15. J. J. Sha, T. Nozawa, J.S. Park, T. Hinoki, and A. Kohyama, “Tensile properties of SiC-based fibers under crept condition”, Proceedings of the 8th Japan-China Symposium on Materials for Advanced 能量 Systems and Fission & Fusion Engineering，October 4 - 8, 2004 Sendai, JAPAN.
16. J. J. Sha, T. Nozawa, J.S. Park, Y. Katoh, A. Kohyama, “Effect of heat treatment on the tensile strength and creep resistance of advanced SiC fibers, ” Journal of Nuclear Materials, Vols. 329-333 (2004): pp 592-596.
17. J.S. Park, Y. Katoh, A. Kohyama, J.K. Lee, J. J. SHA, H.K. Yoon, “Tailoring the microstructure of hot-pressed SiC by heat treatment,” Journal of Nuclear Materials, Vols. 329-333, (2004):pp 558-561.
18. Gang Yu, Xiaoqiang Li, Jianjun Sha, et al, “Research on the 表演 and experimental 能量 calibration of charged particle spectrometer-identificator,”核科學與工程, Vol. 24, (2004):pp 12-19.
19. Gang YU, Xiaoqiang LI, Jianjun SHA et al., “Recoils spectrum and distribution in SiCf/SiC composites irradiated by neutrons,”核科學與工程, Vol. 24, (2004):pp139-143
20. J. J. Sha, Y. Katoh, A. Kohyama, “Recent progress and critical issues of SiCf/SiC composite under irradiation environments,” Plasma Science & Technology, Vol.5, No. 5, (2003):pp 1965-1975.
21. J. J. Sha, M. Hauscherr, W. Krenkel, Fiber/matrix interfacial bonding properties at the CFRP step of C/C-SiC fabrication process, 2009, Aril. 1-4, Germany Ceramic Society conference, Bayreuth, Germany.
22. J. J. Sha, M. Hauscherr, W. Krenkel, The influence of thermal treatment of carbon fibers on the interfacial shear strength during the pyrolysis of CFRP to C/C composites, The proceedings of the 11th International Conference and Exhibition of the European Ceramic Society, 2009, Jun 21-25, Cracow, POLAND.
專著出版
Jianjun Sha, 英文專著獨立章節發表在“Strength of Materials”一書中，2009, ISBN: 978-1-60741-500-8, Nova Science Publisher，New York, U.S.A.
Jianjun Sha, Shojiro Ochiai et al., 發表英文專著獨立章節在“Ceramic and Polymer Matrix Composites”一書中, Nova Science Publisher, New York，U.S.A. In press.
會議發表
J. J. Sha, M. Hauscherr, W. Krenkel, Correlation between processing, microstructgure and 表演 of carbon fiber reinforced C-SiC composite, 2008, Oct. 8-10. Presentation at Alexander Von Foundation meeting, Darmstadt, Germany.
J. J. Sha, M. Hauscherr, W. Krenkel, Fiber/matrix interfacial bonding properties at the CFRP step of C/C-SiC fabrication process, 2009, Aril. 1-4, Oral presentation at German Ceramic Society conference, Bayreuth, Germany.
J. J. Sha, M. Hauscherr, W. Krenkel, The influence of thermal treatment of carbon fibers on the interfacial shear strength during the pyrolysis of CFRP to C/C composites, Oral presentation at the 11th International Conference and Exhibition of the European Ceramic Society, 2009, Jun 21-25, Cracow, POLAND.
J. J. Sha, S. Ochiai, S. Iwamoto, K. Morishita, H. Okuda, Y. Waku, N. Nakagawa and A. Mitani, T. Ishikawa, “Effect of microstructure on residual stress and its distribution in DSE by numerical analysis”, Oral presentation at 2007 fall meeting of Japan Institute of Metals, Gifu University, Nagoya, Japan, Sep. 19-22, 2007.
J. J. Sha, S. Ochiai, S. Iwamoto, K. Morishita, H. Okuda, Y. Waku, N. Nakagawa and A. Mitani, T. Ishikawa, “Residual strain in YAG phase of directionally solidified eutectic Al2O3/YAG ceramic composite by X-ray diffraction and finite element analysis”, Oral presentation as specialist at the 16th International Conference on Composite Materials (ICCM-16), 2007, Kyoto, Japan.
J. J. Sha, S. Ochiai, H. Okuda, Y. Waku, N. Nakagawa and A. Mitani, “Residual stresses in directionally solidified eutectic Al2O3/YAG ceramic composite by X-ray diffraction”, Oral presentation at Fall meeting of Japan Institute of Metals, Sept., 16-18, 2005, Nigata University, Japan.
S. Ochiai, S. Ikeda, S. Iwamoto, J. J. Sha, H. Okuda, Y. Waku, M. Nakagawa, A. Mitani, M. Sato and T. Ishikawa, “Residual Stresses in YAG of Melt Growth Al2O3/YAG Eutectic Composite Estimated by Indentation Fracture Test and Finite Element Analysis,” Oral presentation at 2nd Directionally Solidified Eutectic Ceramics Workshop, December 4th-6th, 2006, Kyoto, JAPAN.
J. J. Sha, S. Ochiai, H. Okuda, Y. Waku, N. Nakagawa and A. Mitani “Residual stresses in YAG phase of directionally solidified eutectic Al2O3/YAG ceramic composite”, Presented at the 2nd Directionally Solidified Eutectic Ceramics Workshop, December 4th-6th, 2006, Kyoto, JAPAN.
J. J. Sha, T. Nozawa, Y. Katoh, A. Kohyama, “Mechanical property and microstructure of SiC/SiC composite” (subtitle: The first trial of large scale production by NITE process), presented at the 1st COE (Center Of Excellence) international symposium on the sustainable 能量 system, March 13-14, 2003, Campus Plaza Kyoto, Kyoto, Japan.
J. J. Sha, T. Nozawa, J.S. Park, Y. Katoh, A. Kohyama, “Effect of heat treatment on the creep behavior of silicon carbide fibers”, Oral presentation at Fall meeting of Japan Institute of Metals, October, 11-14, 2003, Hokkaido university, Japan.
J.S. Park, J. K. Lee, J. J. Sha, Y. Katoh, A. Kohyama, “Heat treatment effect on the oxidation behavior of LPS SiC,” Oral presentation at Fall meeting of Japan Institute of Metals, Oct. 11-14, 2003, Hokkaido University, Japan.
J. J. Sha, T. Nozawa, J.S. Park, Y. Katoh, A. Kohyama, “Effect of heat treatment on the tensile strength and creep resistance of advanced silicon carbide fibers”, presented at ICFRM11, December, 7-12, 2003, Kyoto, Japan.
Yu Jinnan, Wu Yican, Sha Jianjun, et al, “Neutron radiation effects of the center conductor post in a spherical tokamak reactor, presented at ICFRM10, Oct. 10-16, Barden-Barden, Germany.
J. J. Sha, T. Nozawa, J.S. Park, T. Hinoki, and A. Kohyama, “Creep resistance and tensile properties of advanced SiC fibers under severe environments”, presented at the 2nd domestic symposium for 21st century COE program, March, 8-9, 2004, Kyoto University, Japan.
J. J. Sha, T. Nozawa, J.S. Park, T. Hinoki, A. Kohyama, “Environmental effects on creep resistance and microstructure of SiC fibers”, Oral presentation at Spring meeting of Japan Institute of Metals, March 30-Apri. 1, 2004, Tokyo Institute of Technology, Japan.
J. J. Sha, T. Nozawa, J.S. Park, T. Hinoki, and A. Kohyama, “Tensile properties of SiC-based fibers under crept condition”, Oral presentation at the symposium of Fifth Nuclear Fusion Society, June 17-18, 2004, Sendai, Japan.
J. J. Sha, J.S. Park, T. Hinoki, A. Kohyama, “Tensile properties and microstructural characterization of SiC-based fibers under crept conditions”, Oral presentation at symposium of 2nd International School of 能量 Science, July 19-20, 2004, Rajamagara Institute of Technology, Bangkok, Thailand.
J. J Sha, J.S. Park, T. Hinoki, and A. Kohyama, “Hot corrosion, oxidation and their effect on the tensile properties of SiC-based SiC fibers in alkaline melts”, Oral presentation at Fall meeting of Japan Institute of Metals, Sep. 28-31, 2004, Akita University, Japan.
J. J. Sha, J.S. Park, T. Hinoki, A. Kohyama, “Tensile Behavior and Fracture Surface Characterization of SiC-based Fibers under Applied Load”. Oral presentation at the 8th Japan-China Symposium on Materials for Advanced 能量 Systems and Fission & Fusion Engineering October 4 - 8, 2004 Sendai, JAPAN.
J. J. Sha, J.S. Park, T. Hinoki, and A. Kohyama, “Tensile properties and creep behavior of SiC-based fibers under various oxygen partial pressures”.Oral presentation at the Fifth Pacific Rim International Conference on Advanced Materials and Processing (PRICM5), Nov. 2-5, 2004, Beijing, China.
J. J. Sha, J.S. Park, T. Hinoki, and A. Kohyama, “Oxidation and Hot corrosion of SiC materials in alkaline melts”, presented at the 2 International Symposium on Sustainable 能量 System, Kyoto University, Dec. 17-18, 2004, Kyoto Univeristy, Kyoto, Japan.
J. J Sha, J.S. Park, T. Hinoki, and A. Kohyama, “Oxidation and corrosion of SiC materials in alkaline melts”, oral presentation at Spring meeting of Japan Institute of Metals, March, 29, 2005, 橫濱市 National University, Japan.
榮譽獎勵
1. 2007.11：德國洪堡基金會（AvH Foundation：Alexander von Humboldt Foundation）研究獎學金。
2. 2005.9: 日本學術振興會（JSPS:Japan Society for the Promotion of Science）研究獎勵費。
3. 2002. 6：日本文部省（日本文部科學省：Ministry of Education, Culture, Sports, Science and Technology）囯費獎學金。
4. 2000.3：中國原子能科學研究院反應堆工程與設計研究所青年學術報告一等獎。
5. 2000.7：中國原子能科學研究院青年學術報告二等獎（一等獎空缺）。
6. 1994.1：寧夏回族自治區優秀畢業生。
參考資料 >